All PTC Creo Parametric 1.0 Tutorials
16
5 Cool Things in Creo Parametric
- PTC Creo Parametric
- |
- 17866 Views
- |
- Introductory Level
- |
- Steve Meyers
- Here are 5 cool things discovered in Creo Parametric 1.0.
8
Making Assembly Drawings
- PTC Creo Parametric
- |
- 14134 Views
- |
- Advanced Level
- |
- Mark Taddonio
- This Creo Parametric tutorial will demonstrate how to create an assembly drawing complete with a bill of materials and corresponding balloons. There are a few different ways to create the balloons such as using Create Balloons - All, Create Balloons - By View and Create Balloons - By Component. Also, demonstrate how the Clean Balloons tool is useful a useful tool for quickly organizing the balloons.
... (Show more) (Show less)
7
Creating a Cam Follower Connection, Spring & Damper
- PTC Creo Parametric
- |
- 10852 Views
- |
- Intermediate Level
- |
- Mark Taddonio
- This Creo Parametric tutorial will show how to create a cam follower connection in the Mechanism application. The drag tool to demonstrate how a cam follower connection changes the way the mechanism acts. This tutorial will also demonstrate how to create springs & dampers and how they can be added to your models.
... (Show more) (Show less)
11
Creating a Helical Pattern
- PTC Creo Parametric
- |
- 8579 Views
- |
- Intermediate Level
- |
- Steve Meyers
- Learn how to create a simple helical pattern, then turn it into a more complex one.
9
Assembling a Mechanism Using Connection Sets
- PTC Creo Parametric
- |
- 8241 Views
- |
- Intermediate Level
- |
- Mark Taddonio
- This tutorial will show how Connection Sets are very useful for creating Mechanisms; allowing the parts of the assembly move with different degrees of freedom. This tutorial will also explain a few different types of Connection Sets and demonstrate how they restrict certain motions. This video will also highlight how to use a few tools in the Mechanism Application such as Highlight bodies and Drag.
... (Show more) (Show less)
3
Adding Dimensions to a Sketch
- PTC Creo Parametric
- |
- 7998 Views
- |
- Introductory Level
- |
- Mark Taddonio
- This tutorial will demonstrate how to use the Normal dimension tool in Sketcher in Creo Parametric 1.0.
6
Creating a Servo Motor & Running a Kinematic Analysis
- PTC Creo Parametric
- |
- 7511 Views
- |
- Intermediate Level
- |
- Mark Taddonio
- Learn how to create a Servo Motor in the Mechanism Application and see how you can use that Servo Motor to create a Kinematic Analysis. This tutorial will also show how you can use the Playback feature, as well as save and load results.
... (Show more) (Show less)
10
Introduction to the Sketch Tool
- PTC Creo Parametric
- |
- 7130 Views
- |
- Introductory Level
- |
- Mark Taddonio
- This tutorial is an introduction to the Sketch tool in Creo Parametric 1.0. This tutorial will show you how to use various geometry tools in Sketcher.
5
Using the Warp Tool
- PTC Creo Parametric
- |
- 6524 Views
- |
- Advanced Level
- |
- Mark Taddonio
- Learn how to use the Warp tool to distort a sphere and a cylinder into the shape of a power drill in this Creo Parametric tutorial. Also, learn how to use a few different Warp tools such as, Transform, Stretch, Sculpt and Spline. Surfacing tools such as merge to further define the shape will also be used.
... (Show more) (Show less)
3
Creating a Square to Round Blend
- PTC Creo Parametric
- |
- 6274 Views
- |
- Intermediate Level
- |
- Steve Meyers
- Learn how to create a square to round blend in Creo Parametric.
7
Creating a Sphere in Creo Parametric 1.0
- PTC Creo Parametric
- |
- 6156 Views
- |
- Introductory Level
- |
- Mark Taddonio
- This tutorial demonstrates how to create a sphere in the Creo Parametric 1.0.
7
Quick Start to Integrating Multiple Models into Single Design
- PTC Creo Parametric
- |
- 5563 Views
- |
- Intermediate Level
- |
- John Peng
- At the end of this tutorial, you will be able to: Identify the differences between multiple designs; determine which elements of each design you wish to keep or ignore; enable true design collaboration by allowing engineers / designers to work on the same models; and avoid having to re-create or re-build features
... (Show more) (Show less)
4
Introduction to Drawings
- PTC Creo Parametric
- |
- 4979 Views
- |
- Introductory Level
- |
- Mark Taddonio
- In this tutorial I demonstrate how to create, scale, move and dimension a drawing file.
2
Creating a Parallel Blend Protrusion or Cut
- PTC Creo Parametric
- |
- 4330 Views
- |
- Intermediate Level
- |
- Adam Haas
- In this video tutorial you will learn to create a parallel blend feature.
1
Creating Planar Cross Sections
- PTC Creo Parametric
- |
- 4288 Views
- |
- Intermediate Level
- |
- Adam Haas
- In this video tutorial you will learn how to create planar cross-sections.
7
Advanced Repairs with Import DataDoctor
- PTC Creo Parametric
- |
- 4200 Views
- |
- Intermediate Level
- |
- Mark Taddonio
- This Creo Parametric tutorial demonstrates how to replace trimming edges to edit boundary surfaces and shows how to copy and paste a surface to a new location. It will also show how to close gaps.
6
Using the Style Feature to Create a Freeform Surface
- PTC Creo Parametric
- |
- 4177 Views
- |
- Intermediate Level
- |
- Mark Taddonio
- This tutorial demonstrates how to use the Style feature to create a Freeform Surface. It explains how to use Free curves and Curves on Surface tools, as well as how to add constraints such as, Surface Tangent and Normal, to curves and points. This tutorial also shows how to merge two surface/quilts together to create one surface.
... (Show more) (Show less)
7
Understanding the Ribbon Interface
- PTC Creo Parametric
- |
- 3837 Views
- |
- Introductory Level
- |
- Adam Haas
- In this video tutorial you will get an overview of the new ribbon-style user interface in Creo Parametric.
3
Creating Dimension, Direction and Axis Patterns
- PTC Creo Parametric
- |
- 3786 Views
- |
- Intermediate Level
- |
- Mark Taddonio
- This Creo Parametric tutorial will demonstrate how to use the pattern tool to create Dimension, Direction and Axis Patterns.
4
Creating Scoops and Bulges with Freeform Surfaces
- PTC Creo Parametric
- |
- 3764 Views
- |
- Intermediate Level
- |
- Mark Taddonio
- This Creo Parametric 1.0 tutorial demonstrates how to make Scoops and Bulges out of Freeform surfaces. It also shows how surfaces can be made into a solid feature or interact with one.