All PTC Creo Elements/Direct & CoCreate Tutorials
1
CoCreate Modeling Process
- PTC Creo Elements/Direct & CoCreate
- |
- 5718 Views
- |
- Intermediate Level
- |
- Paul Liu
- The explicit nature of CoCreate Modeling enables you to work with legacy and imported data without limitations.
3
Creating a Model from a DXF drawing
- PTC Creo Elements/Direct & CoCreate
- |
- 4551 Views
- |
- Intermediate Level
- |
- Wayne Foslien
- When working with outside suppliers who only use a 2D drafting tool; you may want to incorporate their designs into your 3D design. This video shows you how to load a DXF drawing into Annotation and use the 2D geometry to create a 3D model.
... (Show more) (Show less)
Moving Faces
- PTC Creo Elements/Direct & CoCreate
- |
- 1786 Views
- |
- Introductory Level
- |
- Paul Liu
- This lesson demonstrates the various options and methods of linearly moving faces to modify a part.
Creating Simple Drawing
- PTC Creo Elements/Direct & CoCreate
- |
- 1699 Views
- |
- Introductory Level
- |
- Paul Liu
- Typical 2-D drawing creation process from a 3-D model. This video demonstrates drawing creation using Creo Elements/Direct Annotation.
1
Aligning Faces
- PTC Creo Elements/Direct & CoCreate
- |
- 1570 Views
- |
- Introductory Level
- |
- Paul Liu
- This tutorial demonstrates the Align command, which modifies faces based on a reference face.
1
Creating Screw Connections
- PTC Creo Elements/Direct & CoCreate
- |
- 1364 Views
- |
- Introductory Level
- |
- Paul Liu
- Screw Connections loads a combination of screws, washers and nuts into a design. This video demonstrates inserting a screw connection while drilling the required holes into the mating parts.
Creo Elements/Direct 18.0 Tips and Tricks - Basic Keyboard Shortcuts
- PTC Creo Elements/Direct & CoCreate
- |
- 1253 Views
- |
- Introductory Level
- |
- Jake Koch
- This tutorial will shows you Basic Keyboard Shortcuts. Short video covering three basic keyboard shortcuts and how they make 2-D sketching easier.
Folding Sheet Metal Part
- PTC Creo Elements/Direct & CoCreate
- |
- 1161 Views
- |
- Introductory Level
- |
- Paul Liu
- This video demonstrates the new ability to fold a sheet metal part along a radius.
Drafting Process
- PTC Creo Elements/Direct & CoCreate
- |
- 1133 Views
- |
- Introductory Level
- |
- Paul Liu
- Typical 2-D design process starts with construction geometry. This video demonstrates the design of a simple part in Creo Elements/Direct Drafting.
1
Using Relative Measurements
- PTC Creo Elements/Direct & CoCreate
- |
- 1112 Views
- |
- Introductory Level
- |
- Paul Liu
- Relative measurements offer an alternate method to locate 2-D point for creating 2-D geometry.
1
3D Copilot Features
- PTC Creo Elements/Direct & CoCreate
- |
- 1084 Views
- |
- Introductory Level
- |
- Wayne Foslien
- In this short video, you will learn how to preselect a part, position a part with 3D Copilot Snapping, copy a part and position with snapping, then move a face and snap the location of that face to the same position as another part.
... (Show more) (Show less)
Performing Loft
- PTC Creo Elements/Direct & CoCreate
- |
- 968 Views
- |
- Introductory Level
- |
- Paul Liu
- The Loft command can be used to add or remove material from a part. This video demonstrates creating a 3D part using the Loft command from two 2D workplanes match-lined.
Pulling for Machine
- PTC Creo Elements/Direct & CoCreate
- |
- 864 Views
- |
- Intermediate Level
- |
- Paul Liu
- This tutorial demonstrates the create-in-place and the use of 3D CoPilot with a Machine operation.
7
Creo Elements/Direct 18.0 Enhancement---Blend/Chamfer creation and modification extensions
- PTC Creo Elements/Direct & CoCreate
- |
- 831 Views
- |
- Introductory Level
- |
- Tao Sheng Shen
- Blend and Chamfer creation and modification are even more intuitive and predictable thanks to interactive results calculation with realistic feedback like in the Push/Pull command. The Option Mini Toolbar has been extended to include more behavior controls for fast and convenient access. In addition, the intra-command interaction has been revised to not only collect parameters for and preview the final blend/chamfer creation or modification at the final OK click. Instead, it auto-completes each incremental operation step when the next edge or chain of edges is selected
... (Show more) (Show less)
Creating an Arc with the line command
- PTC Creo Elements/Direct & CoCreate
- |
- 826 Views
- |
- Introductory Level
- |
- Ketan Abhonkar
- This tutorial demonstrates the creation of Arcs within a Line command without releasing the tool.
Modifying Patterns
- PTC Creo Elements/Direct & CoCreate
- |
- 818 Views
- |
- Introductory Level
- |
- Paul Liu
- Process starts with hole pattern that needs to be modified. This video demonstrates how to exclude parts of the pattern and add additional features using the Punch command.
Positioning Parts 1
- PTC Creo Elements/Direct & CoCreate
- |
- 808 Views
- |
- Introductory Level
- |
- Paul Liu
- This demo shows how to move a part on/near another part in the assembly. The first method shows positioning by two points: one point on the part to be moved; second point on the other part. The second method demonstrates moving a part by direction length relative to another part in the assembly.
... (Show more) (Show less)
Using Drafting Construction
- PTC Creo Elements/Direct & CoCreate
- |
- 787 Views
- |
- Introductory Level
- |
- Paul Liu
- Construction geometry can be used for 2-D design. This video demonstrates the use of construction lines for design layout and preparation
7
Creo Elements/Direct 18.0 Enhancement--Unfold and Refold extensions
- PTC Creo Elements/Direct & CoCreate
- |
- 755 Views
- |
- Introductory Level
- |
- Tao Sheng Shen
- Cylindrical sheet metal parts with bend angle between 180° and 360° can be folded and unfolded by the Roll Bending process capability. Shop data (Sheet Metal product, only) include K-factor information. Unfold Parts and Refold Parts are extended to support multiple part modifications in one step.
... (Show more) (Show less)
Adding to a Sheet Metal Part by Polyline
- PTC Creo Elements/Direct & CoCreate
- |
- 750 Views
- |
- Introductory Level
- |
- Paul Liu
- This demo shows how to add to a current sheet metal part using a polyline. The polyline has already been drawn as a 2D object on a work plane when this demonstration is opened. The Add by polyline command considers bend and bend relief types when performed.
... (Show more) (Show less)